Blog
Noise When Turning Steering Rack OE 19179021 Diagnosis Guide

A clunking or knocking noise when turning the steering wheel on Chevrolet Silverado and GMC Sierra trucks can be caused by a worn steering rack 19179021. The noise occurs because the internal rack bushings or pinion bearings have worn, allowing the rack to shift within the housing.
On trucks with high mileage, rack noise is often mistaken for a ball joint or tie rod problem, but the noise is directly tied to steering input.
What Is Steering Rack 19179021
The steering rack 19179021 is a power steering rack and pinion for Chevrolet Silverado, GMC Sierra, and Tahoe SUVs. It is a recirculating-ball or rack-and-pinion design depending on the chassis.
Diagnosis
- Turn the steering wheel slowly left and right while parked; listen for clunks
- Jack up the front end and inspect the rack mounting bushings
- Try to move the rack in its cradle; any movement indicates wear
- Check the inner tie rod boots for play or swelling
Replacement
- Flush the power steering system
- Four-wheel alignment required
- Replace outer tie rod ends if worn
- Bleed the system after installation
Our 19179021 Steering Rack
Our remanufactured steering rack 19179021 is rebuilt with new bushings and seals for GM trucks. Tested for quiet, smooth operation.
Get Wholesale Quote
Send your VIN or OE number to confirm fitment. We supply wholesale steering racks and pumps to repair shops and distributors.