Blog
How to Bleed Air from Power Steering System
What You Are Hearing
Proper bleeding after pump replacement on Maintenance procedure.
Key Points
- Fill reservoir to proper level; start engine and cycle wheel lock-to-lock 10 times; check fluid level and repeat; do not hold at full lock more than 3 seconds; air causes whining noise; bleeding may take 15-20 minutes of driving
Diagnosis Steps
- Check power steering fluid level and condition.
- Inspect drive belt for cracks and proper tension.
- Look for leaks at pump shaft, hoses, and reservoir.
- Does the noise change with RPM or steering input?
- Compare aftermarket pump options by OE number and fitment.
Always flush the system and use correct fluid when replacing the pump. Browse our Shop for OE-matched power steering pumps.