Blog
Power Steering Pump Pulley: Removal and Installation Tips
What You Are Hearing
Swapping pulley between old and new pumps on Repair procedure.
Key Points
- Need pulley puller/installer tool ($20-$40); never hammer the pulley; press on until flush with shaft; check alignment with straight edge; misalignment causes belt chirp and bearing wear
Diagnosis Steps
- Check power steering fluid level and condition.
- Inspect drive belt for cracks and proper tension.
- Look for leaks at pump shaft, hoses, and reservoir.
- Does the noise change with RPM or steering input?
- Compare aftermarket pump options by OE number and fitment.
Always flush the system and use correct fluid when replacing the pump. Browse our Shop for OE-matched power steering pumps.