Power Steering Pump Noise

International DT466 Power Steering Pump for Medium-Duty

The DT466 is the most popular medium-duty diesel ever built. Its power steering pump has known cross-references and failure points.

What the Driver Feels

  1. Whine at idle on a 4700 or 4300 truck
  2. Heavy steering on a loaded box truck
  3. Leaks at the pump gasket
  4. Pressure below 1,650 PSI
  5. Contaminated fluid from neglected service
  6. Pump noise after long hours
  7. Groan at full lock
  8. Belt slip on cold mornings

What Causes It

The International DT466 (used in 4300, 4400, 4700, and 4900 series trucks) is the backbone of medium-duty delivery fleets. The power steering pump is 542 0273 10 or 3535275C91, producing 21 mL/rev at 165 bar. Delivery trucks stop and go all day, working the pump constantly. After 250,000 miles, pump wear causes whine and heavy low-speed steering.

The DT466E and DT530E variants (electronic engines) use pump 2005337C91. Common failure: the pump’s flow control valve sticks, causing either low pressure or pressure spikes that blow the high-pressure hose. Fleets that flush every 50,000 miles see pump life double.

How to Inspect

Safety: International medium-duty trucks have easy-access front ends. Wheel chocks required.

1. Identify your engine variant (DT466 mechanical vs DT466E electronic).

2. Test pressure: 165 bar (2,400 PSI) max.

3. Inspect the pump mounting bolts for vibration looseness.

4. Check the reservoir and suction line.

5. OE cross: 542 0273 10, 3535275C91, 2005337C91.

Recommended Repair

  1. Replace with a reman medium-duty pump.
  2. Flush the system — delivery trucks see heavy stop-and-go use.
  3. Replace the high-pressure hose at the same service.
  4. Use International-approved hydraulic fluid.
  5. Bleed and pressure-test. Road test and recheck at 500 miles.

Send us your VIN or OE number to get a fast wholesale quote on a replacement power steering pump. We stock new and reman pumps for passenger cars and heavy-duty trucks.